Floor Coatings in Villa Park, IL

Villa Park garage floor coatings

The floors we install are polyaspartic flake systems, and our MK Concrete Coatings crew, the same company as ONIT Solutions, puts them down. The crew diamond grinds the concrete and fixes cracks and pits so the slab is sound. A moisture vapor barrier epoxy base goes on next, and flake is broadcast into it wet, to full refusal. Once it is scraped, a polyaspartic top coat seals the floor against hot tires, road salt and UV.

Villa Park is on our regular route, reached on Route 83, Roosevelt Road, St. Charles Road and North Avenue, with the Illinois Prairie Path crossing the village. It sits in DuPage County between Lombard and Elmhurst. If you work in the garage with the door up all summer, the front few feet of floor sit in direct sun, and some coatings yellow or chalk there first. Polyaspartic resists UV, so that strip ages like the rest of the floor, and the same coat handles the salt that rides in on the tires all winter.

What a Villa Park floor coating includes

Slab grinding

Diamond tooling opens the concrete evenly, and we do not acid etch.

Repairs first

Cracks, pits and chipped spots at the door are filled and ground flush.

Epoxy vapor barrier

The base coat stops moisture rising from the slab, the step one-day installs skip.

Flake broadcast

Flake goes into the wet base until the base refuses more, then the crew scrapes it.

UV-resistant top coat

Polyaspartic stands up to sun through an open door, hot tires and road salt.

Garage, basement or shop

The same system and the same 10-year written workmanship warranty cover all three.

How a Villa Park job runs

Call for a free on-site estimate, and we will measure the floor and bring cured flake samples you can see in daylight at the open door. The written estimate is $8.50 per square foot with a $2,000 minimum. Anything the grind uncovers that was not in the plan gets priced in writing first, and it waits for your approval. We book around the days we said and walk the floor with you once the top coat is on.

Measured floor and a written price
Samples checked in daylight
Diamond grind and slab repairs
Epoxy base under the flake
UV-resistant polyaspartic top coat
10-year workmanship warranty, written down

See floor colors and pricing at MK Concrete Coatings

Floor Coatings estimate in Villa Park

Tell us about the project and we will set a time to look at it.

FAQ

Floor Coatings in Villa Park: questions

Will the floor yellow in the sun?

The polyaspartic top coat resists UV, which is why we use it. The part of the floor by the open door holds up like the rest.

Can I use the garage as a workshop after?

Yes. Walk on it after 24 hours and bring vehicles back after 72. Drips and sawdust sweep or wipe off the sealed surface.

Do I need a Villa Park permit?

Coating an existing slab usually does not call for one. If the village requires it on your job, we pull it.

Do you work in towns around Villa Park?

Yes. We also coat floors in Lombard, Elmhurst, Oakbrook Terrace and Addison.

How much is it?

It runs $8.50 per square foot, and the minimum job is $2,000. Text (815) 585-1750 and we will set up a free measure.

Other work we do in Villa Park

Nearby

Floor Coatings in Villa Park