An Addison garage or shop floor built to handle road salt, hot tires and sunlight, laid over a diamond-ground slab and backed by a 10-year written workmanship warranty.
Our MK Concrete Coatings crew puts down polyaspartic flake floors for garages, basements and the shops people work in on weekends. We diamond grind the slab rather than acid etching it, then repair the cracks and pits the grind exposes. Next comes a moisture vapor barrier epoxy base with flake broadcast into it to full refusal. Once the excess is scraped away, a polyaspartic top coat goes over everything to resist hot tires, road salt and UV.
Addison is on our regular route, and we reach it on I-355 and I-290, with Lake Street, Route 53 and Army Trail Road covering the village. This part of DuPage County sees heavy salt on the main roads all winter, and that brine ends up on garage floors. If your garage doubles as a workshop, there may be oil soaked into the concrete as well. The grind takes off what is on top, and if oil has gone deeper, we show you and price the extra prep in writing before we touch it.
Diamond tooling cuts through sealers, paint and surface oil so the base bonds to sound concrete.
Where oil has soaked in below the grind, we show you the spot and price the extra cleaning before doing it.
We fill the cracks and divots, then grind them flat so the flake lays down evenly.
The base coat blocks moisture coming up through the slab so the floor stays bonded.
We bury the base in flake and then scrape off the loose chips that did not take.
Polyaspartic resists hot tires, road salt and UV, which is what a garage that is also a shop puts it through.
Start with a free estimate at the house, where we measure the slab, look at any oil or damage and lay cured flake samples on the floor for you. The written scope spells out each step at $8.50 per square foot, with a $2,000 minimum. Anything that changes once the grind starts gets priced in writing, and you approve it before we do it. We show up on the days we booked, and the job ends with a walkthrough of the finished floor.
Call or text (815) 585-1750 to have us measure the slab, look at the oil spots and show you flake colors in person.
Call or text (815) 585-1750
Email matt@onitcc.com