Homer Glen, Will County

Trim & Door Painting in Homer Glen

The door you use most and the trim around it come out with a hard enamel that wipes clean and stands up to daily traffic. We cover Homer Glen, room by room and door by door.

Trim and door painting in Homer Glen

Homer Glen is on our regular route, and we run trim and door painting as its own job instead of an afterthought at the end of a wall repaint. The work covers baseboard, door and window casing, crown, stair rails and spindles, and interior and exterior doors. We fill nail holes, caulk the joints that have opened, sand down any gloss and put a bonding primer over old oil-based paint. The final coat is an enamel in the sheen you pick, cut straight against the wall.

We reach Homer Glen on I-355 and along Bell Road, 143rd Street and 159th Street, and the village sits in Will County between Lockport, Lemont and Orland Park. In a lot of houses, the door from the garage into the house takes more abuse than any other door, from bikes, bags, boots and shoulders. If yours is chipped at the edges and gray around the knob, we clean off the grime, sand the dings smooth, prime the bare spots and give it a tough enamel. The casing and baseboard in the entry next to it get the same treatment so the whole spot looks cared for.

Trim & Door Painting by ONIT Solutions

What we cover on a Homer Glen trim job

Garage entry door

The door into the house gets degreased, sanded, primed where the wood or metal shows and finished in a hard enamel.

Entry and mudroom trim

Casing and baseboard in the high-traffic spots get their dents filled and sanded before paint goes on.

Old oil paint primed

If the existing trim paint is oil-based, a bonding primer goes on first so the new coat does not peel in strips.

Stair rails and spindles

Rails sanded smooth for your hand, and each spindle brushed out so no drips build at the base.

Exterior door trim

Casing around outside doors gets loose paint scraped off, bare wood primed and a top coat on a dry day.

Your sheen, cut clean

Satin, semi-gloss or gloss, your call, with a straight line where the trim meets the wall.

How a Homer Glen trim job runs

We come out, walk every room and door you want painted, and write the estimate on site at no charge. The written scope lists each run of trim, each door, the prep and the sheen. If we find soft wood or a split jamb once we start, we price that fix in writing and wait for your yes before touching it. We book around the days we said and walk the finished trim with you before we pack up.

  • Free estimate, written on site
  • Every door and trim run listed
  • Dents filled and joints caulked
  • Bonding primer over old oil paint
  • Enamel in the sheen you choose
  • Final walk-through with you
FAQ

Trim & Door Painting in Homer Glen: questions

Do you paint trim in towns around Homer Glen?
Yes. We paint trim and doors in Lockport, Mokena and New Lenox, and every job starts with a written estimate.
Can you paint a metal door from the garage?
Yes. Metal doors get cleaned, scuff-sanded and primed with a primer made for metal before the enamel, so the paint holds instead of flaking.
Do I need a permit in Homer Glen to paint trim and doors?
For paint alone, the village does not usually ask for one. Where a rotted door frame or a new exterior door gets added to the job, we find out what Homer Glen requires and pull that permit before the work starts.
How long does trim painting take?
Most of the time goes into prep: filling, caulking, sanding and priming. Then each coat needs to dry before the next one. Call or text (815) 585-1750 and we will put the number of days in the estimate.
Are you insured?
Yes. We carry liability insurance, and we can send the certificate before work starts.

More questions and answers ›

Also in Homer Glen

Other work we do in Homer Glen

Nearby

Trim & Door Painting in nearby towns

Free estimate

Get a trim and door estimate in Homer Glen

Snap a picture of that beat-up garage door or the hallway trim and text it to (815) 585-1750. We will come out, look it over and hand you a written price.

Call or text (815) 585-1750
Email matt@onitcc.com

Or call or text (815) 585-1750. We reply during business hours.

Call (815) 585-1750Get an Estimate