Deck, Fence & Wood Staining in Frankfort, IL

Deck and fence staining in Frankfort

The best time to restain is before the wood fails. A deck or fence that still has some of its last coat usually needs a cleaning, a brightener and a fresh coat, not a full strip. We look at how much stain is left, tell you whether a maintenance coat will do, and do it. If the finish has already peeled or the wood has gone gray and rough, we strip, sand and replace what is damaged before staining.

Frankfort is on our regular route, and we reach it on Route 30, Route 45, LaGrange Road and I-80. If your fence is cedar, it will weather to silver when left alone, and once the surface fibers break down, getting the color back takes more work. A drop of water tells you a lot: if it beads on the boards, the last coat is still working, and if it soaks in and darkens the wood, it is time. If your yard backs onto the Old Plank Road Trail or another open stretch, sun and wind on the exposed side of the fence wear it faster than the sheltered side.

Deck, Fence & Wood Staining by ONIT Solutions

What a Frankfort staining job looks like

Maintenance coat

A deck or fence that still has some stain left gets cleaned and a fresh coat, with no stripping needed.

Water bead test

We check how water sits on the wood so you know whether the last coat is still working.

Cedar cleaned, not blasted

Cedar is soft, so we clean it at low pressure and brighten it without raising fuzz in the grain.

Full restoration when it is time

Gray, rough or peeling wood is stripped, sanded and repaired before a full stain job.

Exposed side looked at closely

The face that takes the most sun and wind is checked hardest, since it wears through first.

What to watch for next

We tell you the signs to look for so the next coat happens before the wood fails again.

How a Frankfort staining job runs

Our free estimate starts with a look at how much finish is left, and we write down whether the wood needs a maintenance coat or a full restoration, plus the stain that goes on. You approve that written scope, and we put the work on dry days and keep to them. If something turns up mid-job, like boards softer than they looked, you get a written price before we fix them. We wrap up with a walkthrough of the deck and fence together.

Honest call: maintenance coat or full redo
Water test on your boards
Low-pressure cleaning on cedar
Stain chosen for the wear the wood sees
Changes approved in writing
Walkthrough of every surface

Deck, Fence & Wood Staining estimate in Frankfort

Tell us about the project and we will set a time to look at it.

FAQ

Deck, Fence & Wood Staining in Frankfort: questions

How often does a deck or fence need restaining?

It depends on the stain, the sun and the foot traffic. Transparent stain needs it soonest, solid stain lasts longest, and deck floors need it before railings and fences. The water bead test tells you when.

Do you pressure wash cedar?

We clean cedar at low pressure with a cleaner and brightener. High pressure tears up the soft grain and leaves a fuzzy surface that takes stain unevenly.

Do I need a permit in Frankfort for deck or fence staining?

Staining does not usually need one. If the job includes replacing fence posts or deck framing, we check with the Village of Frankfort first.

What towns near Frankfort do you work in?

We also stain decks and fences in Mokena, New Lenox and Orland Park.

When should I call?

When water stops beading on the wood, or early in spring so we can plan the work around the weather. Call or text (815) 585-1750 and we will come look.

Deck, Fence & Wood Staining in Frankfort