Floor Coatings in Romeoville, IL

Flake floor coatings for Romeoville garages and shops

If you work on cars or keep a bench in the garage, the floor takes more than parking. Our MK Concrete Coatings crew builds a polyaspartic flake floor for that kind of use, starting with a diamond grind and repairs to every crack and pit. A moisture vapor barrier epoxy base goes down next, with flake broadcast into it to full refusal. After scraping, a polyaspartic top coat seals the surface against hot tires, road salt and UV.

Romeoville is on our regular route off I-55, Route 53 and Weber Road, with 135th Street running across town toward the Des Plaines River. Oil, brake fluid and coolant soak straight into bare concrete and leave stains that do not come out. On a sealed flake floor those spills sit on the surface until you wipe them up, and the flake hides the everyday marks a working garage picks up. In winter the same top coat keeps salt melt from working into the slab.

What a Romeoville shop or garage floor gets

Stained surface ground off

Diamond grinding takes off the stained top layer so the coating bonds to clean concrete.

Crack and pit fill

We repair the damage so the floor under your creeper and jack is one flat surface.

Moisture barrier base

The epoxy base blocks vapor from the slab. It is the layer one-day installers leave out.

Flake broadcast to refusal

We keep throwing flake until the wet base will not hold more, for full color and texture.

Scraped and vacuumed

Loose chips and sharp high points come off after the base cures.

Sealed polyaspartic top coat

Spills stay on top until you wipe them, and the coat resists hot tires, salt and UV.

How a Romeoville floor coating gets done

We set a free estimate at your place, measure the floor and bring cured flake chips so you can choose a color in the room where it will go. The written price is $8.50 per square foot with a $2,000 minimum. If stains have soaked deep or grinding turns up damage, we explain what it needs and put any extra cost in writing for your approval first. On install days we keep to the schedule we gave you, and before we leave we walk the floor and give you the cure times.

Free estimate where the floor is
Stained top layer ground off
Cracks and pits repaired
Flake broadcast until the base is full
Clear top coat that wipes clean
Written workmanship warranty, 10 years

See floor colors and pricing at MK Concrete Coatings

Floor Coatings estimate in Romeoville

Tell us about the project and we will set a time to look at it.

FAQ

Floor Coatings in Romeoville: questions

Will oil stains come through the coating?

We grind the stained surface off first. If a stain has soaked deep into the slab, we tell you at the estimate what it takes to deal with it before we coat.

Why do you grind instead of acid etching?

Diamond grinding opens the concrete evenly and leaves nothing behind. Acid etching can leave residue and a patchy surface, and a coating is only as good as what it is stuck to.

Do I need a Romeoville permit for a garage floor coating?

Usually not for coating an existing slab. If the village of Romeoville requires a permit for something else in the job, we pull it.

How long does the floor need before I use it?

Walk on it after 24 hours and park on it after 72. Call or text (815) 585-1750 and we can talk through the timing for your garage.

What other towns around Romeoville do you work in?

We also coat floors in Lockport, Bolingbrook and Lemont.

Other work we do in Romeoville

Nearby

Floor Coatings in Romeoville