Deck, Fence & Wood Staining in Willow Springs, IL

Deck and fence staining in Willow Springs

We clean every board, brighten the wood, and take off any finish that has started to peel, by stripping or sanding. Loose or rotted boards are replaced before staining. Then we explain the three kinds of stain plainly: transparent shows the most grain, solid shows the least and protects the most, and semi-transparent sits in between. You pick, and we apply it once the wood is dry enough to take it.

Willow Springs is on our regular route, off I-294 and along Archer Avenue and Willow Springs Road in Cook County. If your lot slopes toward the Des Plaines River valley, your deck may sit high on tall posts with long stair runs, and the posts, stringers and the underside of the stairs all need stain too. If your yard backs up to the forest preserves, leaves and seeds pack into the board gaps and hold water against the wood. We clear every gap before cleaning, then check the boards with a moisture meter, since wood near the river and the trees can take longer to dry out after a wash.

Deck, Fence & Wood Staining by ONIT Solutions

What Willow Springs deck staining includes

Gaps cleared

Leaves, seeds and dirt picked out between boards so water drains instead of sitting on the edges.

Posts and stringers

Tall posts, stair stringers and the underside of the stairs cleaned and stained, not only the walking surface.

Moisture checked

We test the wood with a moisture meter after washing and wait until it is dry enough to stain.

Old coating off

Peeling stain stripped or sanded so the new coat goes on bare, sound wood.

Soft boards replaced

Rotted deck boards and stair treads replaced before staining.

Your choice of opacity

Transparent, semi-transparent or solid, explained plainly so you know what each one shows and protects.

How a Willow Springs staining job runs

First we come out, walk the deck and the slope under it, and write up the scope: boards, stairs, posts, repairs and the stain. If a stair tread or post turns out softer than it looked, we show you and get your OK on a written price before we fix it. We schedule around the weather and the drying time, and we tell you the days you will be off the deck. You walk the finished work with us before we pack up.

Written scope with every stair and post
Board gaps cleared
Moisture tested before stain
Repairs approved in writing
Stain choice explained
Walkthrough before we leave

Deck, Fence & Wood Staining estimate in Willow Springs

Tell us about the project and we will set a time to look at it.

FAQ

Deck, Fence & Wood Staining in Willow Springs: questions

Do you stain the stairs and posts, or only the deck floor?

The whole thing if you want it: deck boards, railings, stairs, stringers and posts. We list exactly what is included in the written estimate.

How soon after washing can you stain?

Once the wood reads dry on the moisture meter. That can take a day or two, longer in shade or humid weather, so we schedule wash day and stain day apart and tell you both.

Do I need a permit to stain a deck in Willow Springs?

Staining alone usually does not need one. If we are rebuilding stairs or replacing posts, we check with the village and pull a permit where it is required.

Do you work near Willow Springs?

Yes. We stain decks and fences in Burr Ridge, Palos Park, Lemont and La Grange.

How do I get a price on my deck?

Call or text (815) 585-1750. Photos of the deck and of the stairs from below help us plan the estimate visit.

Other work we do in Willow Springs

Nearby

Deck, Fence & Wood Staining in Willow Springs