Deck, Fence & Wood Staining in Shorewood, IL

Staining Shorewood decks and fences the right way

A lot of stain failures start with stain that went onto wet or dirty wood. We clean the deck or fence, brighten it, give it time to dry and check it before we open a can. Old finish that is peeling gets stripped or sanded, and loose or rotted boards get replaced with new ones. Then we apply the type you chose, transparent, semi-transparent or solid, and explain what each one means for how long it lasts.

We cover Shorewood, reaching it off I-55, Route 59, Route 52 and Black Road. If your lot sits near the DuPage River or a low corner of the yard, the deck and fence can stay damp well after a rain, and morning dew can sit on the boards into the day. That matters, because stain over damp wood traps the moisture and lets go. We check that the boards have dried out and start late enough in the morning for the dew to burn off, so the wood sets the timing and not just the forecast.

Deck, Fence & Wood Staining by ONIT Solutions

What a Shorewood staining job covers

Dry wood check

Before staining, we check that the boards have dried out from cleaning and rain, and we wait when they have not.

Clean, then brighten

A cleaner takes off dirt and mildew, and a brightener restores the wood's color so stain absorbs evenly.

Peeling coats removed

Coatings that are lifting get stripped or sanded back so new stain grips the wood, not a failing layer.

Low boards and posts inspected

Boards and posts near the ground, where water sits, are checked for rot and replaced before staining.

Stain worked into the grain

Each board gets stain worked in by brush or pad, with extra attention on cut ends and joints.

Patio and plantings covered

The house wall, patio, beds and anything under the deck are covered before we start.

How a Shorewood staining job works

Weather sets the calendar on staining more than anything else, so we plan for it from the first visit. The free estimate is written on site and lists every board area, the repairs and the stain, and the job is booked once you approve it. If rain soaks the wood, we move a day and tell you why. Any repair we find mid-job is priced in writing before we do it, and the job ends with a walkthrough and touch-ups.

Wood checked dry before stain
Cleaning and brightening included
Peeling finish stripped or sanded
Rotted boards replaced first
Stain types explained plainly
Walkthrough and touch-ups at the end

Deck, Fence & Wood Staining estimate in Shorewood

Tell us about the project and we will set a time to look at it.

FAQ

Deck, Fence & Wood Staining in Shorewood: questions

How long does the wood need to dry after cleaning?

It depends on sun, shade and humidity. Some decks are ready the next day, and shaded ones take longer. We check the boards before staining instead of going by the clock.

What happens if it rains right after you stain?

We watch the forecast and do not stain when rain is due before the stain can soak in. If the weather moves a day, we tell you and reschedule.

Do I need a permit to stain in Shorewood?

Staining and cleaning do not usually need one. If the job grows into structural deck repair, we check with the Village of Shorewood and pull what is required.

What towns around Shorewood do you serve?

We also stain decks and fences in Minooka, Channahon, Joliet and Plainfield.

How do I get started?

Call or text (815) 585-1750. A few photos of the deck or fence help us know what to look for when we come out.

Other work we do in Shorewood

Nearby

Deck, Fence & Wood Staining in Shorewood