Deck, Fence & Wood Staining in Plainfield, IL

Deck and fence staining in Plainfield

Staining is a cleaning and repair job before it is a coating job. Our crew washes the wood, brightens it so the gray fibers come off, and strips or sands any old finish that has started to peel. Loose and rotted boards get replaced before a drop of stain goes on, because stain will not hold a soft board together. Then we apply the stain you picked and work it into the grain, board by board.

Plainfield is on our regular route, and we reach it off Route 59, Route 126 and 127th Street. If your yard backs onto open ground or a retention pond, the deck and fence take full sun and wind, and the south-facing boards tend to gray first. If your street has a homeowners association, it may have rules on fence and deck colors, so bring us the approved list and we will match the stain to it. We also look under the deck while we are there, since a stain job is a good time to catch a loose joist hanger or a post that has started to rot.

Deck, Fence & Wood Staining by ONIT Solutions

What a Plainfield staining job includes

Wash and brighten

A deck cleaner lifts dirt and mildew, then a brightener takes off the gray layer so the stain soaks into fresh wood.

Peeling finish stripped

Old coatings that have started to flake are stripped or sanded off, since new stain over loose stain peels with it.

Boards replaced first

Cracked, cupped or soft deck boards come out and new ones go in before any staining starts.

Rails and spindles by hand

Railings, balusters and stair stringers are brushed, so stain reaches the edges and inside corners a roller misses.

Fence faces and posts

Fence pickets, rails and post tops are stained on the side you choose, or both sides when we can reach them.

House and yard covered

Siding, the patio, plantings and anything stored under the deck get covered before we open a can.

How a Plainfield staining job runs

We look at the wood with you and write a free estimate on site that lists every surface, the prep and the stain. Once you approve that written scope, we put the job on the calendar and book around the days we said, moving a date only when rain leaves the wood too wet. If we pull a board and find rot underneath that was not on the estimate, you get a written price and decide before we fix it. When the last coat is on, we walk the deck and fence with you and touch up anything you point out.

Free written estimate before any work
Gray wood cleaned and brightened
Bad boards replaced before stain
Stain types explained in plain terms
Siding and plantings covered
Walkthrough with you at the end

Deck, Fence & Wood Staining estimate in Plainfield

Tell us about the project and we will set a time to look at it.

FAQ

Deck, Fence & Wood Staining in Plainfield: questions

How do I pick a stain for my Plainfield deck?

It comes down to how much pigment you want. Transparent stain shows the most grain and needs recoating soonest, semi-transparent sits in the middle, and solid stain hides the grain and protects the most. We put samples on a spare board so you can see the color on your own wood.

Do I need a permit to stain a deck in Plainfield?

Cleaning and staining do not usually need one, and neither does swapping a few deck boards. If the job turns into rebuilding stairs or framing, we check with the Village of Plainfield and pull what is needed before that part starts.

When is the right time to stain?

Spring through fall, on a stretch of dry days. The wood has to be dry before stain goes on and the forecast has to stay clear long enough for it to soak in, so we schedule around the weather and tell you when rain moves a day.

Do you stain decks and fences in other towns too?

Yes. We do the same work in Shorewood, Romeoville, Oswego and Naperville.

How do I get a price?

Call or text (815) 585-1750. Send a few photos of the deck or fence first and we can tell you what we will look at when we come out.

Other work we do in Plainfield

Nearby

Deck, Fence & Wood Staining in Plainfield