Deck, Fence & Wood Staining in Lisle, IL

Deck, fence and pergola staining in Lisle

We cover Lisle for decks, fences, pergolas, wood siding and trim, front doors and interior wood. Each job follows the same order: clean and brighten, strip or sand failed coatings, replace loose or rotted boards, then stain. We help you choose between transparent, semi-transparent and solid stain, and we tell you what each one does for protection and grain. Interior wood gets sanded between coats and a clear topcoat where it is handled.

We reach Lisle on I-88 and Route 53, and work this DuPage County village from Ogden Avenue and Maple Avenue out toward the Morton Arboretum. If your yard sits under big trees, the deck may stay shaded and damp, and that is where mildew, moss and black spots take hold. Stain over mildew traps it and goes dark and blotchy. We kill and wash out the growth, rinse, clear leaves and needles out of the board gaps so water drains, and let the wood dry fully before we stain.

Deck, Fence & Wood Staining by ONIT Solutions

What we do on a Lisle staining job

Mildew killed, not covered

Black spots and green growth get treated with a cleaner made for it and rinsed out before any stain touches the wood.

Gaps cleared

Leaves, needles and dirt packed between deck boards come out so water drains and the board edges dry.

Brighten and dry

A brightener opens the grain after cleaning, and we wait for the wood to dry fully before staining shaded areas.

Rotted boards replaced

Boards that stayed wet long enough to soften are cut out and replaced with new lumber.

Pergolas top to bottom

Posts, beams and rafters get cleaned and stained from ladders, with the deck or patio below covered.

Stain chosen for the spot

We explain how each stain type holds up and help you pick what suits a shaded or sunny part of the yard.

How a staining job runs in Lisle

We walk the yard with you for a free estimate, looking at the shaded spots and the sunny ones. The written scope lists cleaning, repairs, the stain type and the coats. If more rot turns up under the mildew once we clean, we price it in writing and wait for your approval. We book around the days we said and look over the finished wood with you before we pack up.

Mildew treated and rinsed out
Board gaps cleared for drainage
Wood dried before stain goes on
Soft boards replaced
Pergolas reached and stained
Final look with you

Deck, Fence & Wood Staining estimate in Lisle

Tell us about the project and we will set a time to look at it.

FAQ

Deck, Fence & Wood Staining in Lisle: questions

Do you stain near Lisle?

Yes. Naperville, Downers Grove, Woodridge and Warrenville are part of the same staining work.

Why does my shaded deck turn black?

Shade and damp wood let mildew grow on and into the surface. It has to be killed and rinsed out before staining, or it shows through and spreads under the new coat.

Do I need a permit in Lisle?

Not for cleaning and staining in most cases. If repairs grow into new stairs, railings or framing, we check with the village and pull the permit where it is required.

When can you fit it in?

We stain spring through fall on dry days, and shaded wood needs longer to dry after cleaning, so we plan for it. Call or text (815) 585-1750 and we will give you dates with the estimate.

Can you stain a pergola as part of the deck job?

Yes. We add it as its own line in the estimate so you can see what the pergola takes compared with the deck.

Deck, Fence & Wood Staining in Lisle