Peeling stain comes off before new stain goes on, so the color you pick is the color you get. We work in Darien every week on decks, fences and wood trim.
We work in Darien every week, and staining covers decks, fences, pergolas, wood siding and trim, front doors and interior wood. The wood is cleaned and brightened, failed coatings are stripped or sanded, and loose or rotted boards are replaced before we stain. We explain the three main types plainly: transparent shows the most grain, solid shows the least and protects the most, and semi-transparent sits in between. Then we put the one you chose into clean, dry wood.
Darien is in DuPage County, and we get there on I-55 and Route 83, then along 75th Street and Cass Avenue. If your deck already wears a solid stain and you want the grain to show again, a new coat will not get you there. A lighter stain cannot cover darker pigment, so the old coat has to be stripped or sanded down to bare wood first. We tell you at the estimate whether the look you want means stripping, and how much work that adds.

We look at what is on the wood now and tell you whether it can be recoated or has to come off.
Solid or peeling stain gets chemically stripped and rinsed where a lighter look or a better bond needs it.
Rail caps and stubborn spots get sanded so the new stain soaks in evenly across each board.
A brightener goes on after the stripper to bring the wood color back and open the grain.
Boards that are soft, split or loose come out and new ones go in before staining.
We go over transparent, semi-transparent and solid with you and apply the one that gives the look and protection you are after.
The estimate is free, done at your house, and covers what the old coating needs as much as what the new one will be. The written scope names the stripping or sanding, the boards to replace, the stain and the coats. Should anything else turn up after stripping, it gets a written price and waits for your approval. We work the days we booked and walk the finished wood with you.
Call or text (815) 585-1750. We will look at what is on the wood now and write up exactly what it takes to get the look you want.
Call or text (815) 585-1750
Email matt@onitcc.com