Exterior Painting in Villa Park, IL

Villa Park exterior painting for every kind of siding

Wood, aluminum, vinyl and fiber cement all take paint, but each one needs its own prep. Wood gets scraped, sanded and primed where it is bare, and rotted boards get replaced. Aluminum gets washed hard to take off the chalky film that builds up on old factory finishes, then primed where needed. On every surface the caulk at open joints is renewed before finish coats go on.

Villa Park is on our regular route, by Route 83 and Roosevelt Road or along North Avenue and St. Charles Road, with the Illinois Prairie Path running through town. If your house has aluminum siding, rub a hand across it: chalk on your palm means the finish has broken down, and that chalk has to come off before paint will hold. Vinyl can be painted too, with a paint made for it, but a color much darker than the original can make the panels warp in the sun. Dented aluminum panels show more after painting, not less, so we point out any that are worth replacing first.

What a Villa Park exterior job includes

Siding identified

We confirm whether your siding is wood, aluminum, vinyl or fiber cement and write the prep for that material.

Chalk washed off

Old aluminum finishes scrubbed until the chalky film is gone and the surface is ready for primer.

Wood prepped and primed

Loose paint scraped, edges sanded and bare wood primed, with rotted boards replaced.

Vinyl-safe colors

Color choices on vinyl checked against how dark the panels can go without warping.

Trim and soffit

Wood or wrapped trim, soffit and fascia cleaned and painted to match or contrast.

Yard protected and picked up

Walks, beds and the driveway covered while we work, with chips and debris picked up each day.

How the job goes in Villa Park

We look at what the siding is made of first, since that decides the prep, and then write an estimate that lists each surface, the prep, the product and the coats. If a panel or board turns out to need replacing once we get close to it, you see it and get a written price before we do anything extra. Exterior painting is booked on dry days above 50 degrees, spring to fall. When the coats are done, we walk the house with you and take care of any touch-ups.

Siding type confirmed at the estimate
Prep written for your material
Chalky aluminum washed clean
Vinyl colors kept in a safe range
Extra work only with your approval
Walk-around with you at the end

Exterior Painting estimate in Villa Park

Tell us about the project and we will set a time to look at it.

FAQ

Exterior Painting in Villa Park: questions

Can aluminum siding be painted?

Yes. The chalky film has to be washed off first, and bare or worn spots get primer. After that, an exterior paint made for metal bonds well.

Is there a limit on colors for vinyl siding?

There is. A color much darker than the original can make vinyl panels warp in the sun, so we stay with colors made for vinyl and talk it through before we price the job.

Do I need a Villa Park permit to repaint?

Repainting alone usually does not need one. If siding panels are being replaced or a porch rebuilt, we check with the village and pull a permit where it is required.

Do you paint in towns near Villa Park?

Yes. We also paint exteriors in Lombard, Elmhurst, Oakbrook Terrace and Addison.

When can you paint?

From spring to fall on dry days above 50 degrees. Call or text (815) 585-1750 to set up the estimate and get your days on the calendar.

Exterior Painting in Villa Park