Get painted cabinets and new pulls in your Itasca kitchen in the same job, with the old screw holes filled so nothing shows. You see the hardware plan and the full scope in writing first.
We paint the cabinets you already have instead of replacing them, in kitchens, baths and built-ins. The doors and drawer fronts come off and get labeled, and the old hardware is bagged or set aside if you are replacing it. Every surface is cleaned, degreased, scuff-sanded and filled, then primed with a bonding primer and finished in a cabinet-grade enamel that is sprayed on. Frames and boxes are painted in place with the kitchen covered.
Itasca is on our regular route, off I-290 and Route 53, with Irving Park Road and Thorndale Avenue bringing us into town. Refinishing is the right time to change pulls and knobs, since the doors are already off and the holes can be dealt with before primer. If your new pulls have a different hole spacing than the old ones, we fill the old holes, sand them flat and drill the new spacing with a jig so every pull lines up. Have the pulls you want on hand before we start, and we will check the screw length against your door thickness.
Screw holes from old pulls get filled and sanded flat so they disappear under the paint.
New hole spacing is drilled with a jig so pulls line up door to door.
Each door and drawer front is marked and returned to its own opening.
Cleaning and a scuff-sand take off kitchen film and old sheen before primer.
A bonding primer goes on first, then a sprayed cabinet-grade enamel.
When the doors go back up, we adjust the hinges so the gaps between doors line up.
We come out, count the doors and drawers, look at your current hardware and write an estimate that covers the painting and the pull change. If you pick new pulls partway through, or a door turns out to need a repair, we price the change in writing and wait for your approval. We tell you how long the kitchen will be partly out of use while the doors cure, and we keep to the days we booked. The last step is a walkthrough where we open every door and drawer with you.
Call or text (815) 585-1750 and tell us about the cabinets and the pulls you have in mind. We will see the kitchen and write up the whole job.
Call or text (815) 585-1750
Email matt@onitcc.com