Fresh enamel on the doors and trim in your Rosemont home, with floors covered and dust kept in the room we are working in.
We paint the trim that outlines every room, from baseboard and shoe to door casing, window trim and crown, and the doors that hang inside it. The prep is careful: nail holes filled, joints caulked, gloss sanded off, and a bonding primer laid over any old oil-based paint. Interior doors come off and lie flat for painting when that gives the smoothest finish, and they go back up with their hardware once the enamel has cured. Floors and furniture get covered before the first sanding pass.
Rosemont is on our regular route in Cook County, reached off I-90 and I-294 and along River Road and Balmoral Avenue. If you live in a condo or townhome, the building or association may set work hours or rules about the hallway side of your entry door, and we check those before we schedule. Where the outside face of the door belongs to the association, we paint the inside face and the casing on your side and follow its rules for the rest. Sanding dust stays in the room with plastic and a vacuum, which matters more when your neighbors share a wall.

The inside face, edges and casing of your entry door get the full prep and enamel, within any association rules.
Bedroom, bath and closet doors come down, get painted lying flat and go back up once cured.
Baseboard gets filled, caulked at the wall and enameled with the floor masked along every run.
Door and window casing gets nail holes filled, miters tightened with caulk and a straight paint line.
We sand with a vacuum attached and hang plastic where needed, so dust stays where the work is.
Old oil-based trim paint gets scuff-sanded and primed with a bonding primer before the new enamel.
We look at the trim and doors with you, check any building rules on hours or access, and put a free written estimate in your hands. It lists each door and room, the prep, the primer and the sheen. If something turns up behind a door or under old paint, we price it on paper and wait for your approval. We schedule inside the hours your building allows and finish with a walkthrough and touch-ups.
Call or text (815) 585-1750. We will check your building's rules and write the job up before we start.
Call or text (815) 585-1750
Email matt@onitcc.com