Restoration Rebuild in Itasca, IL

Rebuilding Itasca homes after fire, water or storm damage

A rebuild puts back everything that was torn out after a loss, and it covers drywall, insulation, framing, flooring, trim, doors, cabinets and paint. ONIT Solutions also handles the mitigation and cleanup side, so the rebuild scope is being written while the house is still being dried or cleaned. Every room is finished to match what stayed, down to the casing profile and the paint sheen. You get a free written estimate before any of it starts.

We reach Itasca on I-290 and Route 53, and Irving Park Road and Thorndale Avenue take us through the DuPage County village and past the Metra station. If your Itasca home had a kitchen or garage fire, the rebuild depends on what the smoke reached. Framing that stays gets cleaned and sealed with an odor-blocking primer before new insulation and drywall cover it, and that sealing step is part of how the smoke odor is controlled. Water used to put the fire out gets dried and checked like any other water loss.

Fire and loss rebuild work in Itasca

Sealed framing

Studs and joists that stay are cleaned and coated with a sealing primer so smoke odor does not come back through the new walls.

Charred lumber replaced

Framing that burned or lost strength is cut out and replaced before anything is closed.

New insulation

Insulation that held smoke or water is removed and replaced in the walls and the ceiling above the damage.

Drywall and ceilings

New board is hung, finished and textured to blend with the rooms that were not affected.

Doors, trim and cabinets

Doors, casing, base and cabinets that took heat or smoke are replaced with matching profiles and styles where they are still made.

Primer and paint

Every surface that was cleaned or replaced gets a primer that blocks stains and odor, then paint.

How an Itasca rebuild gets from estimate to walkthrough

We do a free on-site estimate and write it line by line in the format insurance carriers use. Fire damage often hides behind finished surfaces, so when we open a wall and find more, we photograph it, price it in writing and wait for your approval. If the carrier's scope misses something, we write a supplement and explain it to you and the adjuster. The trades are booked in order, and we walk each finished room with you before we call it done.

Framing is sealed before the walls close.
Your free estimate is written line by line.
Hidden damage is photographed and priced first.
Supplements are explained, not just sent.
Calls and texts are answered day and night.
Each finished room is walked with you.

Restoration Rebuild estimate in Itasca

Tell us about the project and we will set a time to look at it.

FAQ

Restoration Rebuild in Itasca: questions

Can you start after the fire department leaves?

Yes. Once the house is cleared for entry, ONIT Solutions removes the damaged materials, cleans soot, runs HEPA air scrubbers and dries the water from firefighting, and then we rebuild. Call or text (815) 585-1750 any hour to get started.

Will the smoke smell come back after the rebuild?

Removing the materials that hold the odor and sealing the framing that stays is how the smell is kept out of the new walls. Both steps are part of our rebuild, and we tell you what we find as each wall is opened.

Does a fire rebuild in Itasca need a permit?

In most cases it does, because replacing framing and wiring after a fire usually needs a permit and inspections. Where Itasca requires one, we pull it and schedule each inspection.

How long does a fire rebuild take?

It depends on how much of the house was affected and what has to be ordered. Cleaning and sealing come before framing and insulation, and inspections fall between those steps. We put the order of work in writing so you can see where the job stands.

Do you work in other towns near Itasca?

Yes. Wood Dale, Roselle, Addison and Schaumburg are on our route too, and the rebuild works the same way there.

Restoration Rebuild in Itasca