New drywall in Carol Stream gets an even coat of primer and paint with no roller lap marks across the seams. We spray, back-roll where the finish needs it, and cover everything that is not getting paint first.
Fresh drywall drinks up primer, and the taped seams take it differently than the paper face. Spraying puts down an even film across both, and a back-roll right behind the gun works it into the surface so the seams do not flash through the finish coat. We use an airless sprayer for primer and paint on new walls and ceilings in basements, additions and remodeled rooms. Before the gun comes out, floors, windows, outlets, ducts and anything else that is not getting paint gets covered.
We work in Carol Stream every week, coming in on North Avenue, Gary Avenue, Army Trail Road and Schmale Road. If your Carol Stream basement or addition was just hung and taped, that bare room is the best time to spray, because nothing has moved in yet. Ceilings and walls get primed in one visit, then checked under a work light so any seam that needs another touch of mud gets fixed before the color goes on. If another crew hung the drywall, we look at their finish first and tell you what needs sanding before paint.

An even primer coat seals the paper face and the taped seams so the finish coat dries to one sheen.
A roller follows the spray on walls to push primer into the surface and even out the texture.
Ceilings get sprayed before the walls, so any mist that drifts lands on surfaces that still need paint.
After primer, we look at every seam with a work light and fix any that would show through the color.
Windows, floors, outlets, vents and doors are covered in plastic and paper before we spray.
The estimate lists how many finish coats go on, and that is what goes on.
We look at the new walls, measure the rooms and write an estimate that lists primer, finish coats and what gets masked. If the walls need sanding or seam repair before paint, that shows up as its own line, and anything we find later gets priced in writing and approved by you first. We set the spray days for when the joint compound is fully dry. When the last coat is done, we pull the masking, clean up and walk the rooms with you.
Once the mud is dry, the room is ready for us. Call or text (815) 585-1750 to book a time to measure the new walls and ceilings.
Call or text (815) 585-1750
Email matt@onitcc.com