Lisle, DuPage County

Drywall Repair in Lisle

Straight, solid outside corners and smooth hallway walls again, without the dents and cracked bead. We repair drywall in Lisle homes, from one corner to every wall in the house.

Drywall and corner repair in Lisle

We cover Lisle for drywall repair, including holes, cracks, popped fasteners, ceilings damaged by leaks, and the corners that take the most abuse. Every repair is cut back to solid board, patched, taped and finished with three coats feathered wide. Sanding happens behind plastic, and the patch is primed and painted to match. When a corner is the problem, we replace the bead itself instead of filling a dent in it.

We reach Lisle on I-88 and Route 53, with Ogden Avenue and Maple Avenue carrying us through DuPage County and past the Morton Arboretum. Hallways, stairwells and the outside corners at the end of a wall are where a house takes its knocks from vacuums, strollers, moving boxes and kids. If the bead on a corner is dented or the compound has cracked off it, filler over the top will chip again. We cut the damaged bead out, set new bead straight and plumb, and feather the compound back into the wall on both sides so the corner is crisp and solid.

Drywall Repair by ONIT Solutions

What we repair in Lisle

Corner bead replaced

Dented, cracked or loose bead is cut out, and new bead is set straight, then finished on both faces.

Stairwell walls

Scrapes and holes on stair walls get patched and finished, with ladders and planks set up safely on the steps.

Holes behind doors

Doorknob holes are patched with backing and finished flat, and we can add a stop to the door.

Cracks and pops

Seam cracks are re-taped, and popped fasteners are reset with a new screw before coating.

Leak-damaged ceilings

After the leak is fixed and dry, stained or sagging board is replaced and sealed with stain-blocking primer.

Primed and painted

Each repair gets primer and paint to match, or the full wall is painted when a patch would show.

How a Lisle repair works

Corners are best judged in person, so we start with a free visit and run a straightedge along each one. The estimate describes each corner and patch in writing, plus which walls get paint. Pulling old bead sometimes shows torn paper or loose board underneath, and that extra work is priced on paper and waits for your yes. Dates are set when you approve, we book around the days we said, and the last step is a walkthrough where you check every corner.

  • New bead, not filler over a dent
  • Corners set straight and plumb
  • Every repair listed in writing
  • Extra work approved before it starts
  • Plastic up while we sand
  • Corners checked with you at the end
FAQ

Drywall Repair in Lisle: questions

Can you fix a corner that keeps chipping?
Yes. A corner that keeps chipping usually has damaged or loose bead under it. We replace the bead and refinish both sides so the corner is solid again.
Do you repair drywall in Naperville, Wheaton and Warrenville?
Yes. We work in Naperville, Wheaton, Warrenville and Downers Grove, with a written estimate before we start.
Do I need a permit for drywall repair in Lisle?
Repairs like patching and replacing corner bead do not normally need one. If a job grows into replacing walls or touches wiring, we check with the village and pull what it requires.
How long does it take?
Bead and patches need three coats of compound with drying time between each, so most repairs take a few visits. The estimate lists the days.
Can I send a photo first?
Yes. Text it to (815) 585-1750 and we will give you a read on the repair, then set up a visit to price it in writing.

More questions and answers ›

Also in Lisle

Other work we do in Lisle

Nearby

Drywall Repair in nearby towns

Free estimate

Get your Lisle drywall repair estimate

Call or text (815) 585-1750 and tell us which corners and walls need work. We will come check each one and give you the price in writing.

Call or text (815) 585-1750
Email matt@onitcc.com

Or call or text (815) 585-1750. We reply during business hours.

Call (815) 585-1750Get an Estimate