Walls with an even sheen from corner to corner, with no thin spots showing when the sun comes in. In Glen Ellyn we spray, then back-roll every wall while the paint is wet.
Spraying alone can leave paint sitting on the surface, thin in some spots and heavy in others. Rolling right behind the sprayer pushes the paint into the wall, evens the film and gives the sheen one uniform texture. That second step separates a sprayed wall that looks good up close from one that only looks good from across the room. We do it on every interior wall where it helps the finish and the coverage.
We cover Glen Ellyn, coming in on Roosevelt Road, Route 53 and Main Street. If your house still has plaster walls, they can have soft spots, hairline cracks and patches that soak up paint differently, so we repair and prime those before spraying. On plaster, back-rolling matters even more, because it works the paint into the small dips a spray coat skims over. Drywall in a newer addition gets the same treatment, so old and new rooms end up with the same look.
Cracks, dents and loose plaster repaired and sanded before any paint goes on.
Patches and bare areas primed so they take the finish coat like the rest of the wall.
Floors, windows, trim, outlets and fixtures covered before the sprayer starts.
Paint applied in even, overlapping passes from the ceiling line to the baseboard.
A roller follows the spray on every wall to set the texture and even the sheen.
The coats listed in your estimate, with drying time between them.
We walk your rooms, check the walls for cracks and soft spots, and give you an estimate in writing with the repairs, the primer, the paint and the coats. Plaster sometimes hides more damage than it shows, and if we open up something larger, you get a written price for it before we go further. Dates are set with you and kept. The last step is a walk through each room with the lights on and the blinds open, so you see the finish the way you will live with it.
Call or text (815) 585-1750. We will check the walls, note the repairs, and write an estimate for spraying and back-rolling.
Call or text (815) 585-1750
Email matt@onitcc.com