Drywall Repair in Arlington Heights, IL

Drywall and plaster repair in Arlington Heights

Drywall repair covers holes, cracks, popped fasteners, dented corners and stained ceilings, each one cut back to sound material and rebuilt rather than buried in filler. A patch gets new board or a backed piece, tape, three coats feathered wide, sanding and primer. When we paint, we match the color and sheen, or paint the whole wall if a spot repair would show. Dust stays in the room behind plastic, with the floors covered.

Arlington Heights is on our regular route in Cook County, reached on Route 53 and worked off Arlington Heights Road and Northwest Highway, from the blocks around downtown and the Metra station outward. Where an older Arlington Heights house still has plaster walls, a repair needs different steps than drywall. Loose plaster gets re-anchored to the lath before anything is patched, and the patch has to come up flush with a surface thicker than standard board. We shim the new piece out to the plaster's depth, tape it and skim the edges so the change in material disappears under paint.

What wall repair covers in Arlington Heights

Plaster cracks

Loose plaster re-anchored to the lath, then the crack taped and skimmed.

Holes in plaster walls

Damaged plaster cut back to solid edges and patched with board shimmed flush.

Drywall holes and dents

Damage cut out to sound board, patched, taped and finished.

Plaster-to-drywall joints

Seams where old plaster meets newer drywall leveled and finished as one wall.

Ceiling cracks

Cracks overhead opened, taped and finished so they stay closed.

Matched paint

Repairs primed and painted in the existing color, or the full wall repainted.

How an Arlington Heights wall repair runs

We look at the wall, tap the plaster to find loose areas, and write a free estimate that lists each repair and how we will make it. If opening the wall turns up loose lath, old wiring or damaged framing, the extra work is priced in writing and waits for your approval. Work starts same-day when the schedule allows and takes a few visits, because plaster patches and compound both need drying time. We contain the dust, protect the floors and trim, and walk every repair with you at the end.

Plaster tapped and checked for loose areas
Free written estimate, repair by repair
Loose plaster re-anchored before patching
Patches shimmed flush with the wall
Floors and trim protected
Paint matched or the wall repainted

Drywall Repair estimate in Arlington Heights

Tell us about the project and we will set a time to look at it.

FAQ

Drywall Repair in Arlington Heights: questions

Do you repair plaster or only drywall?

Both. We re-anchor loose plaster, patch holes with board brought flush to the plaster, and skim the edges so the repair blends.

Should I replace my plaster walls with drywall?

Usually not for a repair. Sound plaster can be patched and kept, and we only suggest replacing a section when it has come loose from the lath over a wide area.

Does Arlington Heights require a permit for wall repairs?

Patching and finishing usually do not. If the work reaches wiring, plumbing or framing, we check with the Arlington Heights building department and pull what it requires.

How long does a plaster repair take?

Plan on a few visits over several days. Each layer dries before the next, and paint goes on once the patch has cured.

Do you work in towns near Arlington Heights?

We do. Call or text (815) 585-1750 for wall repair in Palatine, Rolling Meadows, Rosemont or Schaumburg.

Other work we do in Arlington Heights

Nearby

Drywall Repair in Arlington Heights