Western Springs, Cook County

Trim & Door Painting in Western Springs

Dark interior doors against white trim look sharp when every dent is filled and the finish goes on smooth. We cover Western Springs for doors and trim.

Door and trim painting in Western Springs

We cover Western Springs, and our trim and door work takes in baseboard, casing, crown, window trim, stair rails, spindles and doors on both sides of the house. Prep is where the hours go: filling nail holes, caulking open joints and sanding any glossy finish. A bonding primer goes over old oil paint. The topcoat is a trim enamel in your sheen, brushed or sprayed depending on what gives the best finish on each piece.

Western Springs is on our regular route, reached by I-294, Ogden Avenue, Wolf Road and 55th Street, with the Metra station near the middle of the village. It is in Cook County between Hinsdale, La Grange and Burr Ridge. If you want your interior doors a dark color while the trim stays white, the doors need more care than a straight repaint. A dark enamel shows every brush mark and dent, so we fill and sand the faces harder, use a tinted primer, and spray or roll and tip the doors while they lie flat. We also settle which color goes on each edge before we start, so the door looks right from both rooms.

Trim & Door Painting by ONIT Solutions

What Western Springs door and trim painting includes

Tinted primer for dark colors

A primer tinted toward the finish color helps a dark enamel cover in fewer coats and look even.

Faces filled and sanded

Dents and scratches get filled and sanded smooth, since a dark color shows every flaw.

Doors finished flat

Doors come down and get sprayed or rolled and tipped on stands so the finish levels out.

Edge colors decided up front

We agree with you on which color goes on each edge and jamb so the door looks right from both sides.

Trim kept crisp

Casing and baseboard get filled, caulked and painted so the line between dark door and white trim stays sharp.

Rehung after curing

Doors go back up with the hinges and knobs on once the enamel has hardened enough to handle.

How a Western Springs door job runs

We visit, look at the doors and trim with you and write a free estimate on site. It spells out the colors, the primer, the sheen and which edges get which color. If we find a door that is warped or a jamb that needs repair, that cost comes to you in writing and waits for your approval. We book around the days we said and check every door with you once they are back up.

  • Estimate on paper, at no charge
  • Tinted primer under dark colors
  • Door faces filled and sanded smooth
  • Edge colors agreed before we start
  • Changes approved in writing
  • Doors rehung and looked over together
FAQ

Trim & Door Painting in Western Springs: questions

Can you paint our interior doors black and keep the trim white?
Yes. We prime with a tinted primer, fill and sand the faces, and finish the doors flat so the dark color goes on smooth. The trim stays white with a clean line between them.
Do you paint doors in La Grange and Hinsdale too?
Yes. We paint doors and trim in La Grange, Hinsdale and Burr Ridge, and each job starts with a written estimate.
Is a permit needed in Western Springs to paint doors?
Not for paint. New doors or frames are another matter: if your plan includes them, we confirm the village rules and get the permit squared away first.
How many coats does a dark door take?
Usually primer plus two finish coats, with drying time between each, so doors are down for a couple of days. We put the schedule in the estimate. Call or text (815) 585-1750 to set up a visit.
Do you protect the rest of the house?
Yes. Floors are covered, the spray area is masked off, and we leave each room cleaner than we found it.

More questions and answers ›

Also in Western Springs

Other work we do in Western Springs

Nearby

Trim & Door Painting in nearby towns

Free estimate

Get a Western Springs door estimate

Thinking about dark doors? Text (815) 585-1750 and we will come show you the color plan, edge by edge, in a written estimate.

Call or text (815) 585-1750
Email matt@onitcc.com

Or call or text (815) 585-1750. We reply during business hours.

Call (815) 585-1750Get an Estimate