Hanover Park, Cook and DuPage counties

Floor Coatings in Hanover Park

A Hanover Park garage floor with flake from wall to wall and no thin spots, sealed under a top coat made for salt, hot tires and sun.

Full-flake floor coatings in Hanover Park

We install polyaspartic flake floors in garages, basements and shops with our MK Concrete Coatings crew. Full refusal means we keep broadcasting flake into the wet base until it cannot hold another chip, so the whole floor has the same color and texture. That base is a moisture vapor barrier epoxy, laid over a slab that has been diamond ground and repaired, never acid etched. After the flake, we scrape the floor and finish it with a polyaspartic top coat that resists hot tires, road salt and UV.

Hanover Park is on our regular route, and Irving Park Road, Barrington Road and Lake Street get us anywhere in the village. It straddles Cook and DuPage counties and has its own Metra station. Garages here take road salt and brine all winter, and a floor with thin flake shows that wear first where the base is bare. If your garage is also where the snow blower and the boots live, a full broadcast gives you texture across the whole floor instead of patches.

Floor Coatings by ONIT Solutions

What is in a Hanover Park flake floor

Prep by diamond grinder

We grind the slab to open it up and take off sealers, so the base bonds to the concrete itself.

Slab repairs

Cracks get filled and pits get patched, and both are ground flush with the floor.

Epoxy base that stops vapor

The base is a moisture vapor barrier, and it is the coat that holds the flake.

Broadcast to refusal

We throw flake until the base cannot take any more, leaving no bare or thin areas.

Scrape and clean-up

The loose flake is scraped and swept off before the clear coat.

Top coat for winter and summer

Polyaspartic resists road salt in January and UV and hot tires in July.

How a Hanover Park floor gets done

We start with a free estimate at your house, measuring the slab and showing you cured flake samples in several colors. You get the scope in writing at $8.50 per square foot, with a $2,000 minimum. If the grind reveals extra damage, you see it, get a written price and decide before we repair it. We show up on the booked days and walk the finished floor with you.

  • Flake broadcast to full refusal
  • Same color and texture wall to wall
  • Epoxy vapor barrier holding the chips
  • Slab ground and repaired first
  • Written estimate at no charge
  • Workmanship covered 10 years in writing

See floor colors and pricing at MK Concrete Coatings

FAQ

Floor Coatings in Hanover Park: questions

What does full refusal mean?
It means we keep broadcasting flake into the wet base until it will not take any more. The base ends up completely covered, and the scrape takes off the loose chips that are left.
Which towns near Hanover Park do you serve?
Schaumburg, Bloomingdale and Carol Stream are on our route, along with Hoffman Estates.
Do I need a Hanover Park permit for a floor coating?
A coating over an existing slab generally does not need a building permit. We check with the village of Hanover Park first, and if a permit is required, we pull it.
How long before I can walk and park on it?
Walking is fine after 24 hours. Cars wait 72.
How do I set up the estimate?
Call or text (815) 585-1750. We will measure the floor, bring cured samples and write up the price.

More questions and answers ›

Also in Hanover Park

Other work we do in Hanover Park

Nearby

Floor Coatings in nearby towns

Free estimate

Get a full-flake floor in Hanover Park

Call or text (815) 585-1750, and we will measure your garage and show you flake colors in person.

Call or text (815) 585-1750
Email matt@onitcc.com

Or call or text (815) 585-1750. We reply during business hours.

Call (815) 585-1750Get an Estimate