Orland Park, Cook County

Exterior Painting in Orland Park

Garage doors, front doors and shutters painted as carefully as the siding around them. Our crew handles Orland Park exteriors from the wash to the final coat.

Orland Park exterior painting, down to the doors

The garage door and front door take up a big share of what you see from the street, and they take a beating from sun, hands and weather. We clean them, sand the gloss off, prime any bare metal or wood and finish them in a durable enamel. The rest of the house gets the same order of work: wash, scrape, sand, prime, replace rotted trim, recaulk open joints, then finish coats. Shutters come down where that gives a cleaner result, and they go back up straight.

Orland Park is on our regular route, reached by I-80, LaGrange Road, 159th Street and Wolf Road. If your garage door is steel and has started to rust along the bottom panel, we treat the rust and prime the bare metal before any color goes on. A wood garage door needs the same scrape and prime as trim, plus attention to the bottom edge, where water wicks into the end grain. Where the front of the house is mostly brick or stone, the doors, trim and shutters carry the whole look, and we put the hours there.

Exterior Painting by ONIT Solutions

What an Orland Park exterior job covers

Garage doors

Panels cleaned, rust treated, bare spots primed and the door finished in a coating made for its material.

Entry doors

Front and side doors sanded, primed where needed and brushed out in the sheen you pick.

Shutters

Taken down where needed, cleaned and painted, then rehung level.

Siding and trim boards

Washed, scraped, sanded and primed before the finish coats, with rotted trim boards replaced.

Caulk at every joint

Cracked caulk pulled and replaced around windows, doors and trim so water stays out.

Driveway and beds covered

Drop cloths over plantings, walks and the drive, with everything picked up at day's end.

How your Orland Park job runs

We look at every surface with you, including the doors and shutters, and write it all down: the prep, the product and the number of coats for each. That written estimate is the job, and anything outside it, like a garage door panel that needs more than paint, gets priced in writing for your approval first. We book exterior work on dry days above 50 degrees between spring and fall. When the paint is dry we walk the outside with you and fix what you point out.

  • Free estimate at your house
  • Doors and shutters itemized
  • Rust treated before primer
  • Soft trim swapped out
  • Extra work approved in writing
  • Final walkthrough and touch-ups
FAQ

Exterior Painting in Orland Park: questions

Can you paint a steel garage door?
Yes. We clean it, treat any rust, prime bare metal and finish it with a coating made for exterior metal. Dents and bent panels are a repair, and we tell you if one needs that before paint.
Can you paint shutters without taking them down?
Some, yes. Where taking them down gives a cleaner result and lets us paint the siding behind them, we remove them, paint them flat and rehang them level.
Does Orland Park require a permit to repaint?
A repaint by itself usually does not. If the job grows into replacing siding or rebuilding steps, we check with the village and pull a permit where it is required.
Do you paint in towns near Orland Park?
We do. We also paint exteriors in Homer Glen, Mokena, Frankfort and Palos Heights.
When can you start?
Exterior work runs spring to fall on dry days above 50 degrees. Call or text (815) 585-1750 to set up the estimate, and we will give you start dates in writing.

More questions and answers ›

Also in Orland Park

Other work we do in Orland Park

Nearby

Exterior Painting in nearby towns

Free estimate

Get your Orland Park exterior estimate

Doors, shutters, siding and trim all go on one written scope. Call or text (815) 585-1750 to get yours started.

Call or text (815) 585-1750
Email matt@onitcc.com

Or call or text (815) 585-1750. We reply during business hours.

Call (815) 585-1750Get an Estimate